TECOS AWT66P WALK-THROUGH BODY TEMPERATURE DETECTOR [Ebola virus Disease (EVD) human fever body temperature detector]

TECOS AWT66P walk-through door side type automatic scan body temperature detector (medical body thermometer) detects body temperature & hand-foot-mouth disease (HFMD) body temperature & H1N1 flu body temperature & H3N2 flu body temperature &H7N9 bird flu body temperature & Ebola virus disease (EVD) human fever body temperature and flu body fever temperatures.


AWT66P walk through body temperature detector has a high sensitive body temperature detection devise. It doesn’t interfere with the measured targets making it very safe.

Whenever a person passes through its infrared detection range, it will immediately display human body temperature. This data will be saved by the operator for further use. However, if a person with suspected high fever passes through, it will immediately sound an alarm. This is a very timely and effective manner to prevent the flow of cross-infection among people.

TECOS AWT66P walk-through body temperature detector has a non-contact temperature measurement and high accuracy with fast speed measurement and over-temperature alarm and is particularly suitable for exhibition, ports of entry, airports, stations, prisons, hospitals, hotels, ports, kindergartens, schools, factories, public places. It is very suitable for large flow of people in the public for rapid detecting of human body temperatures.



  1. NON-CONTACT testing, safe & reliable, after the probe scan 0.5 seconds, the voice prompts and it displays test result. The results are digitally shown with LED displays.
  2. The vertical scanning probes cab adjusted by users to accommodate different Sizes of people for accurate measurement. An automatic voice broadcast system broadcasts monitoring results.


  1. Repeated measurement and time interval: 0.5 seconds.
  2. Relative humidity: 80% Voltage: 110V, 220V (+10%), 50Hz/ 60Hz. Temperature resolution: 0.1C. Dimension: about 1180 mm (L) *200 mm (W) *100mm (H). High-grade appearance. Fever alarm. Alarm temperature: 37.5C, (This temperature can be set at  37 C , 37.1C , 37.2 C, 37.3 C, 37.4 C and so on). The factory setup is 37.5 C. There are more than Install 13 medical detection body temperature sensors in this system.

Conform to European medical devices (MMD) 93/42/EEC and EMC Directive 2004/108/EC International safety standards as follow:

  1. Conform to EN 60601-1:2006 medical device international safety standards.
  2. Conform to EN 60601-1-2:2007 medical device emission and immunity international safety standards. Conform to EN55011:2009 medical equipment international safety standards.
  3. Conform to international health safety standards.
  4. Production conforms to EN.
  5. European CE & EMC international standards certificates. 61000-3-3:2008 and EN 61000-3-2:2006+A2:2009 international safety product standards.




One Comment

Leave a Reply to Anuruddha Cancel reply

Your email address will not be published.